Thermocouple Displays

• Accepts mv, Volt, mA, Thermocouple, or RTD input
• Max and Min process value recall functions
• High and Low set-point alarm LEDs with dual internal relay contacts
• Remote push button input for zeroing of displayed value
• Size ~ 1.9" high x 3.8" wide x 2.4" deep (1/8 DIN)
• 12 to 24 VDC powered or 110 to 240 VAC powered

• Available in 8, 16, 24, or 32 channels
• Thermocouple Input version accepts any combination of J, K, T, E, B, N, R, S
• RTD Input version accepts PT100 (2- or 3-wire)
• Dual Limit Alarm trip points adjustable per channel
• RS-485 serial communication interface

• Accepts thermocouple, RTD, Ω, mV, Volt, or mA input (user selectable)
• Max temperature "Peak hold" display capture capability
• High set-point alarm LED warning with internal relay contact
• Miniature Size, Panel cutout is 1.77" x 0.87" (45 x 22 mm) (1/32 DIN)
• 12 or 24 VDC powered

• Accepts thermocouple, RTD, Ω, mV, Volt, or mA input (user selectable)
• Max temperature "Peak hold" display capture capability
• High set-point alarm LED warning with internal relay contact
• 12 or 24 VDC powered
• Analog retransmission output (4 to 20 mA or 0 to 5 VDC)

• User can configure display as 1, 2, 3 or 4 channels
• 2-1/4" (57 mm) Round Gauge
• Recall Max temperature "Peak hold" capability
• Programmable High Temperature set-point alarm
• Each individual input channel can be labeled as either EGT or CHT
• °F/°C selectable

• User can configure display as 2, 4, 6, 8, 10, or 12 channels
• 3-1/8" (80 mm) Round Gauge
• Recall Max temperature "Peak hold" capability
• Programmable High Temperature set-point alarm
• Each individual input channel can be labeled as either EGT or CHT
• °F/°C selectable

• Small Size ~ 1.5" high x 3.0" wide x 1.75" deep
• Max temperature "Peak hold" display capture capability
• High set-point alarm with internal relay contact
• NEMA4X / IP65 Sealed Front Bezel
• Made in USA

• Dual Channel
• Portable battery powered digital LCD temperature display readout
• °C/°F selectable
• Max, Min, Average, T1-T2, and Hold functions
• For Type K or J thermocouple sensor

• 4-Channel
• Portable battery powered digital LCD temperature display readout
• °C/°F/°K selectable
• Max, Min, Average, T1-T2, T3-T4, and Hold functions
• For Type J, K, T, E, R, S, or N thermocouple sensor

2 wire Audible Piezo Buzzer

• AC Input: 100V to 240V, DC Output: 12 volt at 2 amp
• Regulated switching power supply
• Long 8 foot cord

• AC Input: 100V to 240V, DC Output: 24 volt at 0.6 amp
• Regulated switching power supply
• DC voltage output is adjustable via screw potentiometer